Product Introduction:
F586C-PUR is a fully automatic double-gluing high-speed edge banding machine, the highest speed can reach 32m/min. This model has complete functions, stable and powerful system, intelligent operation control and high-speed and efficient production, suitable for mass production of panel furniture. Using high-quality materials and brand configuration, it can adapt to high and low temperature climate and other harsh environments for production operations, with stable production, maintenance-saving, durability and other characteristics.
Operation process:
Separating agent → Pre-milling → Infrared baking lamp1 → Fast hotmelt glue system→ Vertical glue 1 → Servo tape feeding 1→ Five-wheel edge pressing 1 → PUR melters → Infrared baking lamp2 → Servo tape feeding 2 → Vertical glue 2 → Five-wheel edge pressing 2 → Belt pressing →Three motors and double rails end cutting→ Trimming 1 → Trimming 2 → Four-motors corner rounding → Scraper 1 → Scraper 2 → Flat scraper→ Cleaning agent → Polishing 1 → Polishing 2 → PC control system
型号 | Model | F586C-PUR |
电动升降 | Electrical Lift | ● |
总功率 | Motor Power | 32kw |
外形尺寸 | Overall size(L*W*H) | 11000*970*1970mm |
进给速度 | Feed Speed | 16-23-26-29-32m/min |
板料宽度 | Panel Width | ≥60mm |
板料厚度 | Panel Thickness | 10~60mm |
封边带宽度 | Edge Tape Width | 15~65mm |
封边带厚度 | Edge Tape Thickness | 0.4-3mm |
Separating agent By atomizing and spraying before the pre-milling process of the automatic edge banding machine, it can effectively prevent the hot melt glue overflowing during the edge banding process from polluting the board surface, and reduce the workload for subsequent cleaning work. | PC control system 1. Start and stop equipment 2. Function selection 3. Parameter setting 4. Warning notice 5. Other functions | crawler conveyor Heavy railandaluminum beam Ensure the stability of high-speed conveying boards and dust is not easy to pollute the conveying surface of the board surface, improve production efficiency and edge sealing quality. |
Linear guide rail lift It is used to support and guide the moving parts and make reciprocating linear motion in a given direction. It is suitable for mechanical structures with relatively high precision requirements. | Safety and Thickness Anti-misplacement board to avoid damage to the machine. Anti-pressure hand to avoid operator injury during production. | Pre-milling Re-decorate uneven panels or corrugations, burrs or non-vertical phenomena caused by panel saws and cutting saws, so that the edge sealing interface of the panels is flat, so that the edge banding strips and the panels fit closely, so as to achieve better sealing edge effect. No need for manual adjustment, more accurate. |
Infrared Baking Lamp The heating effect makes the edge banding bond better. | China brand PUR hot melt glue machine (double pump glue machine can be selected) Mobile and convenient body, PUR glue is waterproof, moisture-proof, good viscosity, corrosion-resistant, high and low temperature resistant, material saving, and the edge banding effect is more perfect. | No-cleaning PUR glue tank There is no need to clean the glue every day, the glue machine uses as much glue as it needs, and the glue joint head is closed. |
3D Laser Edge Banding The self-developed adjustable rectangular light spot is integrated into the edge banding machine, which can automatically match the energy ratio of the edge banding strip. There is no need to apply glue, and the laser beam is used to instantly melt the back glue of the edge banding strip and stick it to the plate, so that seamless edge banding can be realized. | Servo tape feeding High-precision edge feeding, saving edge materials and improving production efficiency. | Servo horizontal end cutting Ensure that the cutting surface is smooth and smooth, narrow the gap between the boards, the speed is faster, and solve the pain points of scratching the edge banding and beating the board. |
Trimming (Two groups) Use the high-frequency and high-speed motor structure during edge banding to repair the excess edge banding material on the top and bottom of the edge banding plate, so that the width of the edge banding strip is consistent with the width of the edge banding plate. One-button switching can be realized, without the need for technicians to adjust the knife. | Four motors corner rounding High-speed four-head profiling corner rounding, upper and lower rounding device can make the end surface of the plate smoother and more beautiful, improve production efficiency and edge banding effect. | Scraping (two groups) Scrape off the corrugated traces produced during the edge banding process to ensure that the edge banding and surrounding parts of the board are smooth and flat. |
Flat scraping Remove the excess glue line of the edge banding, make the upper and lower parts of the board smoother and tidy, and improve the quality of the edge banding. | Cleaning agent By atomizing and spraying before the polishing wheel of the automatic edge banding machine, the residual hot melt adhesive and other sundries on the workpiece can be effectively removed. | Polishing (Two groups) Clean the finished board with a cotton buffing wheel, and polish the edge end more smoothly. |
Q1. Are your trading company or factory?
A1. We are factory with more than 20000m2 workshop located in Shunde Dist., Foshan, Guangdong, China.
Q2. What machine can you supply?
A2. Our main machines are computer beam saw, edge banding machine, cnc drilling machine, cnc router machine etc.widely used for panel furniture production.
Q3. What is the payment term?
A3. T/T 30% in advance and balance before shipment, LC or by negotiation.
Q4. What is the delivery time?
A4. Normal 380V voltage is 15-30 days, other voltage is 30-45days.
Q5. What is the guarantee?
A5. 12 months for the whole machine. Within 12 months under normal use and maintenance, if something is wrong with the machine, you will get spare part for free. Out of 12 months, you will get spare parts at cost price.You will also get technical support and service all the lifetime.
Q6. Can you support the pre-sales service before confirm the order?
A6. Yes ,you will get experienced pre-sales engineer to support, not only including machine and auxiliary selection but also electrical ,air, machine layout in factory ,etc.
Q7. What is the after sales services?
A7. you will be able to get free training advice towards our machine in our factory. You will also get free suggestion and consultation, technical support and service by online tools. We can also send our engineer to your factory, but need you take charge of all travelling cost and labour cost.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.